Implementasi Flex Sensor Dan Wireless Module Sebagai Alat Bantu Pasien Afasia Motorik

  • Halifia Hendri Fakultas Ilmu Komputer, Universitas Putra Indonesia “YPTK” Padang, Jl Lubuk Begalung Padang
  • Harkamsyah Andrianof Fakultas Ilmu Komputer, Universitas Putra Indonesia “YPTK” Padang, Jl Lubuk Begalung Padang
  • Okta Andrica Putra Fakultas Ilmu Komputer, Universitas Putra Indonesia “YPTK” Padang, Jl Lubuk Begalung Padang
  • Hasri Awal Fakultas Ilmu Komputer, Universitas Putra Indonesia “YPTK” Padang, Jl Lubuk Begalung Padang
  • Dendi Novrizal Fakultas Ilmu Komputer, Universitas Putra Indonesia “YPTK” Padang, Jl Lubuk Begalung Padang
DOI: https://doi.org/10.47233/jteksis.v4i1.388
Keywords: Communication system, Arduino, Flex, NRF24L01, Speaker

Abstract

In the era of technology developing rapidly as it is today, of course, there are many new things being done by the health sector. As a form of convenience in the health sector. With that, the health sector utilizes and applies and develops existing technology as a tool to facilitate and support new adaptations. One of them is by implementing a motor aphasia patient communication system that utilizes the basics of hand kinematics with nurses. This study was conducted aimed at motor aphasia patients and nurses in the health sector. The system is used as a communication tool between motor aphasia patients and nurses. The tool is equipped with a sensor flex as input expenditure command aphasia patient motor by utilizing the basic kinematics of the hand which will then be sent via wireless to the hardware nurse who later dihardware nurses as the output will be sounding the command through the speakers is detected by the sensor flex

Downloads

Download data is not yet available.

References

Instrument The flex sensor, NRF24L01 module, Arduino Mega 2560 Microcontroller, and Arduino Nano Microcontroller are all used in the implementation of the flex sensor on the communication tool for motoric aphasia patients.

Motor aphasia patients can operate effectively and properly by using a sensor that detects the curve of the finger, which is used to communication aids for motor aphasia patients.

The NRF24L01 wireless module, which acts as a transceiver, receiving and transmitting signals, will be processed in the program module, and the program module will send a digital signal to the Buzzer and Mini MP3 Dfplayer, ensuring that the output media performs properly and as it should.

Because the system is powered by rechargeable NICD batteries, the motor aphasia patient gloves and nursing hardware are portable.

REFERENCES

. Abdul Kadir (2017). “Pemrograman Arduino Menggunakan ArduBlock”. Yogyakarta: Andi. Hal 236.

. Benny Pandapotan Siregar (2018). “Kalkulator Sederhana Menggunakan Keypad Dengan Output Speech Synthesizer dan Tampilan Pada LCD”.Universitas Teknologi Yogyakarta:Skripsi.

. Cekmas Cekdin (2017), “Sistem Teknik Kendali”, Hal 8.

. Dr. Junaidi, S.Si., M.Sc Yulian Dwi Prabowo (2018). “Project Sistem Kendali Elektronik Berbasis Arduino”

. Irwandi Tanjung (2017) “Perancangan Sistem Informasi Rekam Medis Terpadu Dalam Upaya Meningkatkan Pelayanan Rumah Sakit Jiwa Tampan Prov.Riau”, Jurnal Intra-Tech, Vol 1,No 1,Hal. 43-54.

. Irwandi Tanjung (2017)“Perancangan Sistem Informasi Rekam Medis Terpadu Dalam Upaya Meningkatkan Pelayanan Rumah Sakit Jiwa Tampan Prov.Riau”. Jurnal Intra-Tech, Vol 1, No 1, Hal. 43-54.

. Irwandi Tanjung (2017)“Perancangan Sistem Informasi Rekam Medis Terpadu Dalam Upaya Meningkatkan Pelayanan Rumah Sakit Jiwa Tampan Prov.Riau”. Jurnal Intra-Tech, Vol 1, No 1, Hal. 43-54.

. Medila Kusriyanto dan nendy wismoyo (2017). “Sistem Palang Pintu Perlintasan Kereta api Otomatis Dengan Komunikasi Wireless Berbasis Arduino” Universitas Islam Indonesia”

. Muhammad Fajar Wicaksono, Hidayat (2017).” Mudah Belajar Mikrokontroller Arduino”.

. Retno Devita, Ruri Hartika, dan Tika Syafriani,(2020). “Pengontrolan Pola Dancing Founting Berirama Music Menggunakan Android Berbasis Mikrokontroler Arduino”. Jurnal Teknologi Informasi dan Pendidikan, Vol. 13, No. 1, Hal. 104-110).

. Sutono, M.KOM (2017) “modul 1 Konsep Dasar Electronika"

. Syaifi Abdurahman (2017) “modul electronica dan mechantronica dasar, serial revitalisasi SMK”, Jakarta Hal 32.

. Tata Sutabri (2016), “Sistem Informasi Manajemen (Edisi Revisi)”, Hal : 2-3.

. Tata Sutabri (2016), “Sistem Informasi Manajemen (Edisi Revisi)”, Hal : 16-17.

. Wahyu Satrio Prayogo, Muhamad Rifal, dan Fajar Budiman (2018).”Kontrol Lengan Robot Yang Meniru Pergerakan Tangan Untuk Inspeksi Objek Yang Mengandung Gas Berbahaya” Institut Sepuluh November.

. H Hendri*, S. E. (2019). Automatic System to Fish Feeder and Water Turbidity. Journal of Physics: Conference Series, 3.

. H Hendri, H. A. (2021). Solar-Cell Implementation for Supporting Tourist Facilities and Tourism Promotion Media. Journal of Physics: Conference Series, 1783.

. Hendri, H. (2017). Sistem Kunci Pintu Otomatis Menggunakan RFID (Radio Frequency Identification) Berbasis Mikrokontroler Arduino Uno R3. Komputer Teknologi Informasi, 4.

. Hendri, H. (2019). Pembersih Tangan Otomatis Dilengkapi Air, Sabun, Handdryer Dan Lcd Menggunakan Sensor Infrared Berbasis Arduino. TEKNOLOGI, 8.

Published
2022-01-19
How to Cite
Hendri, H., Andrianof, H., Andrica Putra, O., Awal, H., & Novrizal, D. (2022). Implementasi Flex Sensor Dan Wireless Module Sebagai Alat Bantu Pasien Afasia Motorik. Jurnal Teknologi Dan Sistem Informasi Bisnis, 4(1), 133-138. https://doi.org/10.47233/jteksis.v4i1.388
Issue
Vol 4 No 1 (2022): Januari 2022
Section
Articles

Copyright (c) 2022 Jurnal Teknologi Dan Sistem Informasi Bisnis - JTEKSIS

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution 4.0 International (CC BY 4.0) that allows others to share — copy and redistribute the material in any medium or format and adapt — remix, transform, and build upon the material for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in this journal.