Sosialisasi Penerapan Peraturan K3 (Keselamatan dan Kesehatan Kerja) Pada Siswa SMA di Kabupaten Solok Selatan Sumatera Barat
Abstract
Occupational Safety and Health (K3) is a form of effort to create a workplace that is safe, healthy, free from environmental pollution, so that it can protect and be free from work accidents, ultimately increasing work efficiency and productivity. Schools are responsible for keeping the environment clean, beautiful and orderly so that a conducive learning environment can be created. Therefore, schools are also required to have professional staff who understand and are competent in the field of K3. The aim of this service is to provide knowledge to high school students in South Solok Regency so that they care more about K3 in their respective school environments. This service found that there was still low awareness of K3 among teachers and high school students in South Solok Regency, it was recorded that the cleanliness of toilets and bathrooms was very lacking in each school, school cleanliness was very lacking, awareness of the use of PPE when driving two-wheeled students was very lacking. especially wearing a helmet. There is a need for guidance in schools, especially for these students, especially regarding K3 culture in schools.
References
Anizar. (2009). Teknik Keselamatan dan Kesehatan Kerja di Industri. Graham Ilmu, Yogyakarta.
Bayu Priadi, Fahmi Rizal, Oktaviani dan Fitra Rifwan. (2018). Penerapan Keselamatan dan Kesehatan Kerja Mahasiswa di Workshop Kayu Jurusan Teknik Sipil Fakultas Teknik Universitas Negeri Padang. CIVED (Journal of Civil Engineering and Vocation Education) 5 (1), 2018
Buntarto. (2015). Panduan Praktis Keselamatan dan Kesehatan Kerja. Kencana. Jakarta
Fitra Rifwan. (2019). “Penerapan Keselamatan dan Kesehatan Kerja (K3) Menggunakan Metode Job Safety Analysis (JSA) (studi Kasus: Workshop Konstruksi Jurusan Teknik Sipil Fakultas Teknik Sipil Universitas Negeri Padang)”.
Gunawan dan Waluyo. (2015). Risk Based Behavioral Safety Membangun Kebersamaan Untuk Mewujudkan Keunggulan Operasi. Jakarta: PT Gramedia Pustaka Utama.
Indrayani, Ika Sulianti. (2014). Kajian Penerapan Keselamatan dan Kesehatan Kerja (K3) dalam Proses Belajar Mengajar di Bengkel dan Laboratorium Politeknik Negeri Sriwijaya. Jurnal Teknik Sipil, Vol. 10, No. 1, Maret 2014
Irawan, B. B., Boy, W., Mazni, D. I., & Saputri, O. D. (2023). Diseminasi Kesehatan dan Keselamatan Kerja pada Workshop Konstruksi di SMK N 1 Sumbar. Jurnal Pengabdian Masyarakat Dharma Andalas, 2(1), 51-57.
Irzal, M, K. (2016). Dasar – Dasar Keselamatan dan Kesehatan Kerja. Kencana. Jakarta
Nadhilah Syahrit, Prima yane Putri. (2021). Implementasi K3 Menggunakan Metode JSA Sebagai Upaya Pencegahan Kecelakaan Kerja (Studi Kasus: Workshop Konstruksi Teknik Sipil Fakultas Teknik Universitas Negeri Padang). Jurnal Applied Science in Civil Engineering 2 (1), 193-196, 2021
Peraturan Menteri Ketenagakerjaan No.8 Tahun 2017 Tentang Standar Balai Latihan Kerja
Peraturan Menteri Tenaga Kerja dan Transmigrasi Nomor: Per-04/Men/1980.Syarat-Syarat Pemasangan dan Pemeliharaan Alat Pemadam Api Ringan.
Peraturan Menteri Tenaga Kerja dan Transmigrasi Republik Indonesia Nomor: Per/08/Men/VII/2008. Alat Pelindung Diri
Permen PUPR No.10 Tahun 2021.Pedoman Sistem Manajemen Keselamatan Konstruksi (SMKK)
Sedarmayanti. 2011. Tata Kerja dan Produktivitas Kerja. Bandung: Mandar Maju
Tarwaka. (2008). Keselamatan dan Kesehatan Kerja. Harapan Press. Surakarta
Undang – Undang Republik Indonesia Nomor 1 Tahun 1970. Keselamatan Kerja
Widodo, Suparno Edo. 2015. Manajemen Pengembangan Sumber Daya Manusia. Yogyakarta: Pustaka Pelajar.
Zulkifli Gusti Arianto, Nurhasan Syah. (2020). Hubungan Pengetahuan K3 dengan Hasil Praktikum Mahasiswa di Workshop Konstruksi Teknik Sipil Fakultas Teknik Universitas Negeri Padang. Jurnal Applied Science in Civil Engineering 1 (2), 100-105, 2020
Copyright (c) 2024 Wendi Boy, Hazmal Herman, Bayu Budi Irawan, Deni Irda Mazni, Gusni Vitri, Wiwin Putri Zayu, Dicky Wahyudi, Iqbal Iqbal, Hanif Hanif
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution 4.0 International (CC BY 4.0) that allows others to share — copy and redistribute the material in any medium or format and adapt — remix, transform, and build upon the material for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in this journal.